Components for corrugated hoses
All components for corrugated hoses are available for the different nominal widths (mm): 17, 23, 29, 36, 48, 70, 95. The shown components are only a small extract of our portfolio. Please contact us for further assistance.

Pressure spring for corrugated hose Ø 70, wire 5 mm, length 1500 mm

Example of assembly Bracket Ø 70 mm + ball joint termination + cable star long Ø 70 mm

Example of assembly Bracket Ø 70 mm + ball joint termination + cable star long Ø 70 mm

Corrugated hose end termination Ø 70 mm

Spring end piece Ø 70 mm

Ball joint termination with half-shell Ø 70 mm

Cable star long Ø 70 mm for ball joint termination, individually drilled holes

Half-shell for corrugated hose Ø 70 mm

Marker ring red for corrugated hose Ø 70 mm, slotted

Protection donut for corrugated hose Ø 70 mm

Wrist-support axis 6, Ø 125 mm, tube Ø 32 mm, robot types: ABB IRB 4400

Adapter plate for the use between bracket and tube clamp piece, suitable for bracket Ø 48 mm and 70 mm

Swivel plate, 120 x 85 mm
Components for smooth tube systems
All components for smooth tube systems are available for the following nominal widths (mm): 40, 60, 80, 100. The shown components are only a small extract of our portfolio.

Yellow rotating boot, 23 mm inner Ø / Tube clamp for pipe Ø 34 mm (2x) This assembly example shows a yellow rotating boot, the corresponding bracket and metal support as well as a tube clamp for a pipe Ø 34 mm.

Yellow boot, rotating and strain relief, 23 mm inner Ø
Assemblies holder
Our strength is the smart combination of components to assemblies which form a secure and reliable mounted solution for axis 1 through 6 for electrical, communication, and other materials (such as water, air...). These can be customized for different interfaces, cantilever systems, and baskets – our experience is your advantage.
The displayed illustrations are a small cross-section of application examples. For each robot type, modifications are possible. We can modify these assemblies not only for specific robots but also for special machines, always in accordance with conditions on-site.
Part no.
ASS0001
Description
Assembly holder axis 1
Part no.
ASS0007
Description
Assembly holder axis 2
Part no.
ASS0014
Description
Assembly holder axis 3
Part no.
ASS0015
Description
Assembly holder axis 4
Part no.
ASS0020
Description
Assembly holder axis 5
Part no.
ASS0033
Description
Assembly holder axis 6
Part no.
ASS0036
Description
Assembly spring-foot 250 parallel motion
Part no.
ASS0037
Description
Assembly system support for BizLink dresspack LSH-line (LSH) axis 3
Assemblies basket
Part no.
ASS0045
Description
Assembly basket
Part no.
ASS0046
Description
Assembly basket
Part no.
ASS0047
Description
Assembly basket
Part no.
ASS0048
Description
Assembly basket
Publication